Viewing a forum - Machinery Talk

Forums | Classifieds (190) | Skins | Language

You are logged in as a guest. ( logon | register )

Machinery Talk
		Message format

Jump to page: < 9922 9923 9924 9925 9926 9927 ... 9928 9929 9930 9931 9932 9933 9934 ... > Forums List -> Machinery Talk

For Fendtman - Ed Winkle : 10/29/2006 18:28
- Re: For Fendtman - drfeelgood : 10/30/2006 05:46
  - Re: For Fendtman - fendtman : 10/30/2006 09:37

x - Kicking Horse : 10/29/2006 16:33
- y - Tim in WI : 10/29/2006 16:45
  - RE: z - halfbaked : 10/29/2006 16:48
    - Re: x - jorlee : 10/29/2006 19:38
      - Re: x - GLS : 10/30/2006 13:36

adrian load runner for pickups - granto : 10/29/2006 16:09

Orbit Reel - Dave NCMO : 10/29/2006 13:16
- RE: Orbit Reel - whatever : 10/29/2006 15:45
- have one - dave swia : 10/30/2006 06:39
  - RE: have one - jjm : 10/30/2006 08:56
    - easy - dave swia : 10/31/2006 05:31
- Re: Orbit Reel - Kelly : 10/30/2006 10:06
  - Instruction almost worthless. - billybob : 10/30/2006 17:45
    - RE: Instruction almost worthless. - dave swia : 10/31/2006 05:34

0 - Rich : 10/29/2006 12:29
- RE: Heh heh, an winters not even here yet. - Ed Winkle : 10/29/2006 12:40
  - RE: Heh heh, an winters not even here yet. - feelnrite : 10/29/2006 18:44
  - Re: Heh heh, an winters not even here yet. - Dan_wcIN : 10/30/2006 09:36
- RE: Heh heh, an winters not even here yet. - agboy : 10/29/2006 12:48
- I know, who needs a humor page when.... - Old Pokey : 10/29/2006 16:18
- RE: Heh heh, an winters not even here yet. - Ron (Cen. IL.) : 10/29/2006 17:37
  - Bada boom!! - plowboy : 10/29/2006 18:00
- RE: Heh heh, an winters not even here yet. - Von WC Ohio : 10/29/2006 21:04
  - RE: Heh heh, an winters not even here yet. - Matt neoh : 10/30/2006 05:53
    - RE: Heh heh, an winters not even here yet. - Von WC Ohio : 10/30/2006 07:09
- shhh-shoo-shoo - Dan_wcIN : 10/30/2006 10:20

OT - Ireland - FarmerTom : 10/29/2006 11:29
- RE: OT - Ireland - Ed Winkle : 10/29/2006 17:28
  - haha......hey cousin winkle - pudding : 10/30/2006 01:28
  - RE: OT - Ireland - Scott (OSU) : 10/30/2006 07:07
    - Pudding and Scott - Ed Winkle : 10/30/2006 10:06
- RE: OT - Ireland - Rosco : 10/29/2006 18:47
- RE: OT - Ireland - Oliver1 : 10/30/2006 09:24
- RE: OT - Ireland - Ralph2908 : 11/6/2006 11:02

Sprayers nitro vs rogator vs jd - wa farmer : 10/29/2006 11:28
- Re: Sprayers nitro vs rogator vs jd - willmarman : 10/29/2006 18:04
  - Re: Sprayers nitro vs rogator vs jd - Cletus : 10/30/2006 07:26

case ih refuge boxes - rjp : 10/29/2006 11:10
- RE: case ih refuge boxes - ihpartsman : 10/29/2006 12:57
  - Re: case ih refuge boxes - rjp : 10/29/2006 13:13
- RE: case ih refuge boxes - Newguy : 10/29/2006 22:31

Can I repair plastic axle on son's toy chisel plow? - dannyboy : 10/29/2006 09:44
- Re: Can I repair plastic axle on son's toy chisel plow? - Jon Hagen : 10/29/2006 11:25
  - Re: Can I repair plastic axle on son's toy chisel plow? - mn farmer : 10/29/2006 11:36
- Re: Do you have a picture? - OHIO-FARMBOY® : 10/29/2006 17:40
- RE: Can I repair plastic axle on son's toy chisel plow? - Gifford : 10/30/2006 18:42

Combine Settings - hillside1007 : 10/29/2006 08:51
- RE: Combine Settings - hillfarmer : 10/30/2006 06:07
  - Re: Combine Settings - Tom Russell : 10/30/2006 06:43

Jim @ Dawn - drfeelgood : 10/29/2006 01:21
- Strip Tilling into Cornstalks, Changing Row Width & New Autosteer - Jim : 10/29/2006 01:25

To hexx with Ford - Land_Surfer : 10/29/2006 00:21
- RE: To hexx with Ford - NVDave : 10/29/2006 01:22
  - RE: To hexx with Ford - WRnSWTN : 10/29/2006 09:57
    - RE: To hexx with Ford - porky : 10/29/2006 11:03
- RE: To hexx with Ford - Ben : 10/29/2006 04:46
  - RE: To hexx with Ford - dave swia : 10/29/2006 06:16
  - RE: To hexx with Ford - NVDave : 10/29/2006 06:36
    - RE: To hexx with Ford - Jay in WA : 10/29/2006 11:19
      - RE: To hexx with Ford - Keith on DelMarVa : 10/29/2006 12:13
        
        Why? - Fla Veggie Farmer : 10/30/2006 02:35
  - RE: To hexx with Ford - P. Huffman : 10/29/2006 08:29
    - RE: To hexx with Ford - Keith on DelMarVa : 10/29/2006 09:07
    - Re: To hexx with Ford - Land_Surfer : 10/29/2006 09:32
      - Re: To hexx with Ford - Keith on DelMarVa : 10/29/2006 09:37
        
        Re: To hexx with Ford - mtbrights : 10/29/2006 09:52
        
        Re: To hexx with Ford - Land_Surfer : 10/29/2006 09:59
        
        Re: To hexx with Ford - usafarmer : 10/29/2006 11:52
        
        Re: To hexx with Ford - Land_Surfer : 10/29/2006 09:58
        
        Re: To hexx with Ford - plowboy : 10/29/2006 11:10
        
        Re: To hexx with Ford - Land_Surfer : 10/29/2006 11:18
        
        Re: To hexx with Ford - agboy : 10/29/2006 11:51
        
        Re: To hexx with Ford - Dan_wcIN : 10/30/2006 07:43
        
        Re: To hexx with Ford - NVDave : 10/29/2006 12:08
        
        Re: To hexx with Ford - Jay in WA : 10/29/2006 12:24
        
        Re: To hexx with Ford - NVDave : 10/30/2006 03:48
        
        1999 Dodge Ram 1500 4WD - Harvuskong : 10/29/2006 13:37
  - Hub Clarification - Jim Beam : 10/29/2006 12:15
    - RE: Hub Clarification - Unit 2 : 10/29/2006 12:41
      - Now that is funny! They didn't even look. LOL - agboy : 10/29/2006 12:44
      - RE: Hub Clarification - Franz© : 10/29/2006 17:21
        
        Re: To hexx with Ford - Kooiker : 10/29/2006 17:39
        Re: To hexx with Ford - jorlee : 10/29/2006 19:28
        Re: To hexx with Ford - Jay NE Ohio : 10/30/2006 04:17
- Re: To hexx with Ford - Tom Russell : 10/29/2006 06:24
  - Re: To hexx with Ford - Russell : 10/29/2006 08:34
    - Re: To hexx with Ford - Steve : 10/29/2006 10:07
      - Re: To hexx with Ford - Ed Boysun : 10/29/2006 10:46
        
        Re: To hexx with Ford - plowboy : 10/29/2006 11:27
        
        Re: To hexx with Ford - Jon Hagen : 10/29/2006 12:03
        
        Re: To hexx with Ford - Harvuskong : 10/29/2006 13:25
        
        Re: To hexx with Ford - Franz© : 10/29/2006 17:24
- RE: To hexx with Ford - Keith on DelMarVa : 10/29/2006 09:01
- You name it, somebody somewhere . . . - Larry NCKS : 10/29/2006 11:42
- Re: I'll take manual hubs anyday - OHIO-FARMBOY® : 10/29/2006 17:34
  - Re: I'll take manual hubs anyday - feelnrite : 10/29/2006 18:52
  - Now that is a good story! - Ed Winkle : 10/30/2006 17:14
  - Re: To hexx with Ford - Fighting suburbia NC : 10/30/2006 20:12

New meaning to Floating Cutter Bar - west illini : 10/28/2006 23:50
- RE: New meaning to Floating Cutter Bar - hillfarmer : 10/29/2006 06:45
- Re: New meaning to Floating Cutter Bar - ekeller2 : 10/29/2006 08:57
- RE: New meaning to Floating Cutter Bar - Mike SE IL : 10/29/2006 18:18
  - Re: New meaning to Floating Cutter Bar - ekeller2 : 10/29/2006 21:11
    - Re: Illinois rainfall graphic - Mike SE IL : 10/29/2006 22:32
    - Re: New meaning to Floating Cutter Bar - west illini : 10/29/2006 23:31
  - Re: New meaning to Floating Cutter Bar - mac4440 : 10/30/2006 12:54
    - Re: New meaning to Floating Cutter Bar - Mike SE IL : 10/30/2006 21:41
- RE: New meaning to Floating Cutter Bar - David Darnall : 10/29/2006 22:36
  - Re: New meaning to Floating Cutter Bar - west illini : 10/29/2006 23:32

What to do N. Platte NEB. - willmarman : 10/28/2006 22:54
- RE: What to do N. Platte NEB. - sparky : 10/29/2006 07:09
  - RE: What to do N. Platte NEB. - Grasseed : 10/29/2006 10:55
  - Re: What to do N. Platte NEB. - willmarman : 10/29/2006 17:56
- RE: What to do N. Platte NEB. - Chet Z : 10/29/2006 07:10
- RE: What to do N. Platte NEB. - swne : 10/29/2006 09:35

run 1 big airdrill or 2 small units - pros and cons - poorboy : 10/28/2006 22:53
- Re: run 1 big airdrill or 2 small units - pros and cons - glensts : 10/28/2006 23:39
  - Re: run 1 big airdrill or 2 small units - pros and cons - rodd : 10/29/2006 09:06
- Re: run 1 big airdrill or 2 small units - pros and cons - mtbrights : 10/29/2006 10:00
- RE: run 1 big airdrill or 2 small units - pros and cons - Jon Hagen : 10/29/2006 12:30
- Re: run 1 big airdrill or 2 small units - pros and cons - wheaties : 10/29/2006 23:01
- RE: run 1 big airdrill or 2 small units - pros and cons - Rosco : 10/30/2006 00:24

tractor wts. on cart tractor - briggsfm : 10/28/2006 22:41
- Re: tractor wts. on cart tractor - Gerard : 10/28/2006 23:42
- RE: tractor wts. on cart tractor - Tim in WI : 10/29/2006 16:15
  - Re: tractor wts. on cart tractor - WNYZONETILLER : 10/29/2006 21:03

difference between a 30 and 40 series Deere tractors - mike in sw mn : 10/28/2006 22:08
- RE: difference between a 30 and 40 series Deere tractors - NVDave : 10/28/2006 22:20
  - RE: OOPs Dave - plowboy : 10/29/2006 11:19
- RE: difference between a 30 and 40 series Deere tractors - Harvuskong : 10/28/2006 22:58
  - RE: difference between a 30 and 40 series Deere tractors - plowboy : 10/29/2006 11:23
    - Where it is coming from is - Harvuskong : 10/29/2006 13:09
      - RE: Where it is coming from is - plowboy : 10/29/2006 17:11
- Re: difference between a 30 and 40 series Deere tractors - ronm : 10/29/2006 01:07
- Re: difference between a 30 and 40 series Deere tractors - Tony Bone : 10/29/2006 21:50
  - Re: difference between a 30 and 40 series Deere tractors - ronm : 10/30/2006 10:40
    - Re: difference between a 30 and 40 series Deere tractors - Tony Bone : 10/30/2006 21:16
      - Re: difference between a 30 and 40 series Deere tractors - plowboy : 10/30/2006 23:19
      - Re: difference between a 30 and 40 series Deere tractors - ronm : 10/31/2006 09:12

converting maglite to led - granto : 10/28/2006 22:02
- Re: converting maglite to led - ronm : 10/28/2006 22:18
  - Re: converting maglite to led - granto : 10/29/2006 21:31
- RE: converting maglite to led - Mike SE IL : 10/28/2006 22:21
- Re: converting maglite to led - ekeller2 : 10/28/2006 22:35
  - Re: converting maglite to led - dave morgan : 10/29/2006 00:41
  - Re: converting maglite to led - Uncle Bubba : 10/29/2006 21:54
- Re: converting maglite to led - Russell : 10/29/2006 08:40
- Re: converting maglite to led - PPo : 10/31/2006 07:44

Tracks question! - Chad H : 10/28/2006 21:59
- RE: Tracks question! - Newguy : 10/28/2006 22:59
  - RE: Tracks question! - Chad H : 10/29/2006 02:17
    - What is the prefered weight bias for a cart? - Old Pokey : 10/29/2006 09:09
      - Quite a bit - Chad H : 10/29/2006 19:54
        
        The reason I ask is.......... - Old Pokey : 10/29/2006 20:43
        
        RE: The reason I ask is.......... - Chad H : 10/30/2006 00:43
    - Re: Tracks question! - dutch : 10/29/2006 09:45
      - Re: Tracks question! - Newguy : 10/29/2006 09:51
        
        Re: Tracks question! - dutch : 10/29/2006 10:48
      - biggest smile!!!! - agboy : 10/29/2006 09:58
        
        Can't afford it.... - Chad H : 10/29/2006 10:15
    - RE: Tracks question! - Newguy : 10/29/2006 09:53
      - In your back yard. - agboy : 10/29/2006 10:14
        
        RE: In your back yard. - Newguy : 10/29/2006 17:10
        
        RE: In your back yard. - agboy : 10/29/2006 17:17
        
        RE: In your back yard. - Newguy : 10/29/2006 20:31
  - RE: Tracks question! - plowboy : 10/29/2006 11:16
- RE: Tracks question! - agboy : 10/28/2006 23:19
  - RE: Tracks question! - plowboy : 10/29/2006 11:14
- Tracks - Like Many Things = Compromise - Luke Skywalker : 10/29/2006 11:37
  - Dolly Partonish ????? - RAB : 10/29/2006 12:45
    - RE: Lack of a Good Understanding Perhaps? - Luke Skywalker : 10/29/2006 13:08

Another cotton harvesting question, while we're at it. - Adrian : 10/28/2006 21:38
- RE: Another cotton harvesting question, while we're at it. - TJG in MS : 10/28/2006 22:22
  - Re: Another cotton harvesting question, while we're at it. - Adrian : 10/28/2006 22:26
    - Re: Another cotton harvesting question, while we're at it. - TJG in MS : 10/28/2006 23:17
      - Re: Another cotton harvesting question, while we're at it. - near cotton : 10/29/2006 00:05
        
        Re: Another cotton harvesting question, while we're at it. - TJG in MS : 10/29/2006 09:49

CrustBuster drill settings - junkmanDan : 10/28/2006 20:09
- RE: CrustBuster drill settings - junkmanDan : 10/29/2006 13:31
- RE: CrustBuster drill settings - fendtman : 10/29/2006 18:21
  - RE: CrustBuster drill settings - junkmanDan : 10/29/2006 20:49

harvesting cotton with weeds - simscott : 10/28/2006 19:29
- Re: harvesting cotton with weeds - Adrian : 10/28/2006 21:35
  - Re: harvesting cotton with weeds - dutch : 10/29/2006 00:05
    - Re: harvesting cotton with weeds - Adrian : 10/29/2006 09:49
      - Re: harvesting cotton with weeds - dutch : 10/29/2006 11:08
        
        Re: harvesting cotton with weeds - Adrian : 10/29/2006 13:40
        Re: harvesting cotton with weeds - TJG in MS : 10/29/2006 13:51
        
        Re: harvesting cotton with weeds - dutch : 10/29/2006 14:11
- RE: harvesting cotton with weeds - simscott : 10/29/2006 05:40
  - Re: harvesting cotton with weeds - dutch : 10/29/2006 10:29

9650sts - gman : 10/28/2006 18:58
- Re: 9650sts - willmarman : 10/28/2006 22:47

Hey Matts,how's the McCormicks doing? - Woodbeef : 10/28/2006 18:04
- RE: Hey Matts,how's the McCormicks doing? - Matts : 10/29/2006 02:03

Are plat maps available on the internet?? - Robzorbk : 10/28/2006 16:46
- RE: Are plat maps available on the internet?? - gil : 10/28/2006 19:33
  - RE: Are plat maps available on the internet?? - BRIAN : 10/28/2006 22:56
    - RE: Are plat maps available on the internet?? - gil : 10/29/2006 00:00
      - Another tip, Gil......... - martin : 10/29/2006 11:40

Wagon tie rods - IaAngus : 10/28/2006 15:43
- RE: Wagon tie rods - Matt neoh : 10/29/2006 06:04

STRIP-TILL (BARS) - mij : 10/28/2006 15:00
- RE: STRIP-TILL (BARS) - halfbaked : 10/29/2006 16:59

Anybody still build "buster bars"? - Cliff SEIA : 10/28/2006 13:22
- RE: Anybody still build "buster bars"? - mij : 10/28/2006 15:05
- Re: Anybody still build "buster bars"? - boog : 10/28/2006 18:16
- RE: Anybody still build "buster bars"? - 489gus : 10/28/2006 19:40
  - RE: Anybody still build "buster bars"? - Cliff SEIA : 10/29/2006 09:23
- Re: Anybody still build "buster bars"? - sodbuster_06 : 10/29/2006 00:31
  - Re: Anybody still build "buster bars"? - HFR : 10/29/2006 09:09

kuchar concaves in axial flow? - houghta3 : 10/28/2006 12:59
- RE: kuchar concaves in axial flow? - dave morgan : 10/28/2006 15:01
- RE: kuchar concaves in axial flow? - bleedred : 10/28/2006 17:38
- Re: kuchar concaves in axial flow? - drfeelgood : 10/29/2006 01:31
  - Re: kuchar concaves in axial flow? - houghta3 : 10/29/2006 10:56
- RE: kuchar concaves in axial flow? - HFR : 10/29/2006 09:25

What language is this clip? - plowboy : 10/28/2006 12:43
- RE: What language is this clip? - jd6400 : 10/28/2006 13:09
  - RE: What language is this clip? - agboy : 10/28/2006 14:31
    - RE: What language is this clip? - plowboy : 10/28/2006 16:15
      - My 20 yr. old---- - jd6400 : 10/28/2006 20:14
- Re: What language is this clip? - dutch : 10/28/2006 13:14
- RE: What language is this clip? - Matts : 10/28/2006 15:38
- Re: What language is this clip? - plowboy : 10/28/2006 16:11
- Here ya go Mark! - agboy : 10/28/2006 20:36
  - Marc...you mean you don't like channel 61??? - Chad H : 10/28/2006 21:39
    - RE: Marc...you mean you don't like channel 61??? - agboy : 10/28/2006 22:07
      - RE: Marc...you mean you don't like channel 61??? - Chad H : 10/29/2006 01:57
- RE: What language is this clip? - NVDave : 10/28/2006 22:45
  - RE: What language is this clip? - plowboy : 10/29/2006 11:33
    - RE: What language is this clip? - NVDave : 10/29/2006 11:54
- RE: What language is this clip?German! - Matts : 10/29/2006 02:17

Mcfarlane Reel-till - CW IL : 10/28/2006 11:16
- RE: Mcfarlane Reel-till - johnepopper : 10/28/2006 13:27
  - RE: Mcfarlane Reel-till - CW IL : 10/28/2006 14:32

Tractor rent - playing_in_the_dirt : 10/28/2006 10:34
- RE: Tractor rent - pbutler : 10/28/2006 11:51
  - RE: Tractor rent - ronshir : 10/28/2006 18:39
- RE: Tractor rent - agboy : 10/28/2006 19:39

PTO drive on 8770 - SEK Farmer : 10/28/2006 08:46

We lost another farmer - Ed Winkle : 10/28/2006 08:15
- RE: We lost another farmer - Old Pokey : 10/28/2006 09:19
- RE: We lost another farmer - russ27 : 10/28/2006 09:20
- Be careful out there! - Tim in WI : 10/28/2006 09:29
  - Re: We lost another farmer - Ed Winkle : 10/28/2006 11:50
    - Re: We lost another farmer - Tim in WI : 10/28/2006 11:53
- RE: We lost another farmer - MX-240 : 10/28/2006 18:45

Corn Harvest pictures - AGCOfan : 10/28/2006 06:47
- Re: Corn Harvest pictures - Downwardspiral : 10/28/2006 07:40
  - Re: Corn Harvest pictures - AGCOfan : 10/28/2006 14:32
- RE: Corn Harvest pictures - Scott (OSU) : 10/28/2006 08:08
  - RE: Corn Harvest pictures - AGCOfan : 10/28/2006 14:42
- RE: Corn Harvest pictures - usafarmer : 10/28/2006 08:48
  - Mud? - Don NMO : 10/28/2006 11:23
    - yep thats mud!!!! NT - usafarmer : 10/28/2006 12:47
    - RE: Mud? - Ben : 10/28/2006 19:40
      - RE: Mud? - Jordan SWMI : 10/28/2006 21:15
        
        RE: combine tracks - dave morgan : 10/28/2006 22:18
  - RE: Corn Harvest pictures - AGCOfan : 10/28/2006 14:44
- RE: Corn Harvest pictures - plowboy : 10/28/2006 11:51
  - RE: Corn Harvest pictures - AGCOfan : 10/28/2006 14:46
    - RE: Corn Harvest pictures - plowboy : 10/28/2006 16:59
      - RE: Corn Harvest pictures - AGCOfan : 10/28/2006 17:57
  - Now what a guy should do is make a bracket..... - Chad H : 10/28/2006 21:52
    - RE: Now what a guy should do is make a bracket..... - plowboy : 10/29/2006 17:22
- RE: Corn Harvest pictures - rice-and-hogs : 10/28/2006 16:29

WANTED: Grain Cart Driver, Laaaaate Model Equip. pic. - Tony Bone : 10/27/2006 22:46
- RE: WANTED: Grain Cart Driver, Laaaaate Model Equip. pic. - hwdcne : 10/27/2006 23:10
- RE: WANTED: Grain Cart Driver, Laaaaate Model Equip. pic. - dave swia : 10/28/2006 06:42
- RE: WANTED: Grain Cart Driver, Laaaaate Model Equip. pic. - farmrmac : 10/28/2006 07:02

WANTED: Grain Cart Driver, Laaaaate Model Equip. pic. - Tony Bone : 10/27/2006 22:44

verticle tillage ? - Ken cen-pa : 10/27/2006 21:51
- RE: Aerway - Hawken Cougar : 10/27/2006 22:07
- Re: verticle tillage ? - Tony Bone : 10/27/2006 22:08
- RE: verticle tillage ? - wolfwood00 : 10/27/2006 23:36
- RE: verticle tillage ? - nebfarmer : 10/28/2006 07:35
  - Re: verticle tillage ? - Greywolf : 10/28/2006 08:20
- RE: verticle tillage ? - MAGNUM8950 : 10/28/2006 09:44
  - RE: verticle tillage ? - JimM : 1/13/2007 15:33
- RE: verticle tillage ? - ndarbuckle : 10/30/2006 09:52
- RE: verticle tillage ? - JimM : 1/13/2007 15:41

CNH off to a good start - Land_Surfer : 10/27/2006 20:22
- Re: CNH off to a good start - candyo1955 : 10/28/2006 08:49
  - Re: CNH off to a good start - usafarmer : 10/28/2006 09:37
  - Re: CNH off to a good start - Cliff SEIA : 10/28/2006 09:45
  - Re: CNH off to a good start - Land_Surfer : 10/28/2006 11:59
  - Re: CNH off to a good start - Mr. Snerdly1 : 10/28/2006 12:16
    - Re: CNH off to a good start - striker782 : 10/28/2006 13:01
  - Re: CNH off to a good start - boog : 10/28/2006 12:46
    - Re: CNH off to a good start - tommyw-5088 : 10/28/2006 15:29
    - Re: CNH off to a good start - plowboy : 10/29/2006 20:05
      - Sneakin around their plant.... - Ed Winkle : 10/29/2006 21:12
  - Re: Wasn't DMI once owned by it's employee's? - OHIO-FARMBOY® : 10/28/2006 19:53

grain cart auger - jeff gordon : 10/27/2006 20:08
- RE: grain cart auger - AGCOfan : 10/27/2006 20:17
- Re: grain cart auger - wheaties : 10/27/2006 21:48
  - Re: grain cart auger - IHboog : 10/28/2006 08:37
- Re: grain cart auger - boog : 10/27/2006 21:50
  - Re: grain cart auger - wheaties : 10/27/2006 23:29
    - Re: grain cart auger - Chad H : 10/28/2006 03:58
- RE: grain cart auger - Silver Shoes : 10/27/2006 22:40
  - Set levers the same. - billybob : 10/28/2006 07:25

good advise and thank you !!!!! - jburke : 10/27/2006 19:59
- RE: good advise and thank you !!!!! - Cliff SEIA : 10/27/2006 20:46

I wish a new corn picker was still made . . . . - Tim(nj) : 10/27/2006 19:17
- RE: I wish a new corn picker was still made . . . . - greenswede : 10/27/2006 23:54
- RE: I wish a new corn picker was still made . . . . - Mike SE IL : 10/28/2006 01:03
  - RE: I wish a new corn picker was still made . . . . - usafarmer : 10/28/2006 09:42
  - RE: I wish a new corn picker was still made . . . . - Tim(nj) : 10/28/2006 11:25
- RE: I wish a new corn picker was still made . . . . - Hay Hud Ohio : 10/29/2006 07:18

farm fans CMS 10E continuous flow dryer - BDR : 10/27/2006 18:19
- Re: farm fans CMS 10E continuous flow dryer - farmdog : 10/27/2006 19:19
- RE: farm fans CMS 10E continuous flow dryer - msb : 10/27/2006 23:20

Soy Diesel Profitability - Gifford : 10/27/2006 16:45
- Re: Soy Diesel Profitability - plowboy : 10/27/2006 17:30
  - Re: Soy Diesel Profitability - dongeffe : 10/27/2006 19:15
    - Re: Soy Diesel Profitability - plowboy : 10/27/2006 23:17
      - Re: Soy Diesel Profitability - usafarmer : 10/28/2006 11:07
      - Paying attention - NEMOScott : 10/29/2006 10:02
- Re: Soy Diesel Profitability - dloc : 10/27/2006 19:09

Multimeters - BHTN : 10/27/2006 14:20
- Re: Multimeters - jorlee : 10/27/2006 14:44
  - Re: Multimeters - Jack G : 10/27/2006 16:47
- RE: Multimeters - NVDave : 10/27/2006 16:56
- Try ebay - Pat H : 10/27/2006 19:52
- thought I wanted a Fluke but bought an Ideal - 99guy : 10/27/2006 20:08
- RE: Multimeters - Franz© : 10/27/2006 20:19
  - Great idea - PeteMN : 10/27/2006 21:21
- RE: Multimeters - BrentOntario : 10/28/2006 00:34
- I like my Fluke 12. - Tom Russell : 10/28/2006 06:54

pneumatic cover crop seeding unit - max gas : 10/27/2006 11:31
- RE: pneumatic cover crop seeding unit - FarmerTom : 10/27/2006 11:51
- RE: pneumatic cover crop seeding unit - Rosco : 10/27/2006 18:03

question for h2oski01 - holdnon : 10/27/2006 11:11

JD 9520t vs. CAT 865B - justapurrin : 10/27/2006 10:43
- Re: JD 9520t vs. CAT 865B - The_Owl : 10/27/2006 11:42
- Re: JD 9520t vs. CAT 865B - cynic : 10/27/2006 16:12
  - Re: JD 9520t vs. CAT 865B - Don NMO : 10/27/2006 19:34
    - Re: JD 9520t vs. CAT 865B - Land_Surfer : 10/27/2006 21:01
      - Re: JD 9520t vs. CAT 865B - Don NMO : 10/27/2006 22:21
        
        Re: JD 9520t vs. CAT 865B - Land_Surfer : 10/27/2006 22:29
        
        Re: JD 9520t vs. CAT 865B - Don NMO : 10/27/2006 22:36
        
        Re: JD 9520t vs. CAT 865B - plowboy : 10/27/2006 23:29
    - Re: JD 9520t vs. CAT 865B - cynic : 10/29/2006 23:41
- RE: JD 9520t vs. CAT 865B - Jaydee : 10/28/2006 03:26
- RE: JD 9520t vs. CAT 865B - justapurrin : 10/30/2006 08:09

Gas or Diesel??? - Chet Z : 10/27/2006 01:21
- RE: Gas or Diesel??? - fendtman : 10/27/2006 07:00
- RE: Gas or Diesel??? - Mike SE IL : 10/27/2006 07:39
  - Re: Gas or Diesel??? - farmb0y : 10/27/2006 08:13
- RE: Gas or Diesel??? - Silver Shoes : 10/27/2006 08:32
- RE: Gas or Diesel??? - agboy : 10/27/2006 08:41
  - Oh Lord.. - Chad H : 10/27/2006 09:03
    - RE: Oh Lord.. - agboy : 10/27/2006 09:20
      - RE: Oh Lord.. - Chad H : 10/27/2006 11:42
        
        RE: Oh Lord.. - agboy : 10/27/2006 19:24
        Re: Gas or Diesel??? - Greywolf : 10/28/2006 06:41
        
        I think I remember - Chad H : 10/28/2006 21:44
        
        Re: Gas or Diesel??? - Greywolf : 10/29/2006 06:27
- RE: Gas or Diesel??? - WRnSWTN : 10/27/2006 08:43
- RE: Gas or Diesel??? - jake21 : 10/27/2006 09:38
  - Re: Gas or Diesel??? - Fighting suburbia NC : 10/27/2006 10:57
- RE: Gas or Diesel??? - CW IL : 10/27/2006 12:29
- RE: Gas or Diesel??? - Cliff SEIA : 10/27/2006 13:32
- Re: Gas or Diesel??? - Downwardspiral : 10/27/2006 17:08
- RE: Gas or Diesel??? - Kelly : 10/27/2006 22:02
  - RE: Gas or Diesel??? - farmb0y : 10/30/2006 13:51

Caseih 2577 combine? - notill89 : 10/26/2006 22:31
- Re: Caseih 2577 combine? - striker782 : 10/26/2006 23:44
  - Re: Caseih 2577 combine? - dave morgan : 10/26/2006 23:55
    - Re: Caseih 2577 combine? - j.p : 10/27/2006 00:01
    - Re: Caseih 2577 combine? - striker782 : 10/27/2006 00:15
    - Re: Caseih 2577 combine? - JohnKS : 10/27/2006 07:14
      - Re: Caseih 2577 combine? - hillfarmer : 10/27/2006 07:41
      - Re: Caseih 2577 combine? - dave morgan : 10/27/2006 11:51
        
        Re: Unloading on the go = "Bagger Attachment" - Dan_wcIN : 10/27/2006 16:23

Jump to page: < 9922 9923 9924 9925 9926 9927 ... 9928 9929 9930 9931 9932 9933 9934 ... > Forums List -> Machinery Talk
(Search this forum)

(Delete cookies)