Hagen Brothers farms,Goodrich ND | The grain tank was full of flax and the sudden bump, stop, tossed quite a bit of grain on the cab roof. brother is tossing it back into the grain tank as it unloads into the truck. The header is rigid mount and twists heck out of the feeder housing when this or a front blow out happens. Usually the feeder housing is flexible enough to survive, just need to put about a 3 ft block under the right end of the header and lower away, this unbends it the same but opposite way it got bent. Always prudent to check for cracked feeder house welds after a disaster like that. :-0 |