|
Rawlins County Kansas | Ted, I was at a page on your website the other day and the Hydraulic PWM valve you have listed on your Raven Electronics page is the exact one I'm using. On this valve does it matter which wire goes to which pin (2 or 7) on the 8-pin connector on the LCM?
http://dwp.bigplanet.com/ldag/ravenelectronics/list.nhtml
I almost have my fert bar re-wired for the Insight. I have to hook up the PWM's today yet and then start reprogramming the console.
Thanks,
Diet
| |
|