|
| Sorry for the confusion but i'm sure that if you look in your vehicle configuration section there is a button for distance calibration (pulses per 100 feet). I'm not talking about the flowmeter calibration (pulses per gallon). I'll look on my insight later today and add a post that tells how to get there. I am using the gps as a speed source. I'm not sure but i think the gps might send out a pulse signal to the insight for distance. the reason I think my pulse setting might be wrong is because the insight was installed originally to do only mapping and autosteer and a raven controller did the rate control. When the dealer added the wiring and unlocks for insight auto rate and auto boom the pulse per 100 feet didn't get entered correctly. I'll add another post on how to check pulses per 100 ft. | |
|