|
| I bought a 4710 this year and when i bought it the dealer put in new front bushings on the scissor linkage and none on the back. I ran it about 100 hours and if I drove over 25 mph my machine would shake. I was also noticing it was harder to stay on rows. Going down the road the rear wheels would wobble. I replaced the bushings myself and problem solved. Its not alot of money, or time to replace the bushings its a job you can do yourself, if your pins are worn they are a little pricey I left my old pins in. The only thing im not sure of is how tight to tighten the nuts on the pins that hold together the scissor linkage. | |
|
Trouble keeping 4720 off the row
