|
Callao Missouri | You may check on this but I bet the little 4" drive coupler from the hydrostat motor to the transmission input shaft has striped out. If that is the case it can be fixed pretty easy ( even in the field ) before you send it packing it's bags. All you need to do is loosen the belts and un bolt the hydro to slide it apart from the transmission.
Also check the drive couplers to each final drive You could have striped on of them and they are real easy to replace just drive the role pin out of both on the side that is giving the problem and pull the axle segment out and slide on a new coupler. Jon | |
|