AgTalk Home
AgTalk Home
Search Forums | Classifieds | Skins | Language
You are logged in as a guest. ( logon | register )

Torn or Tedbear
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
tedbear
Posted 8/26/2008 09:55 (#443536 - in reply to #443530)
Subject: RE: Torn or Tedbear


Near Intersection of I-35 & I-90 Southern Mn.
I'm not familiar with the part number listed. The wiring for both the PF3000 and Insight are the same. Ag Leader does provide power and ground out on pins 4 & 6 besides the GPS part on Pins 2,3 & 5.

So Power and Ground are available at the Insight connector but the cable you have may not use them. My guess is that if there is a separate power connection then pins 4 & 6 are probably not used and you would need to supply power and ground through those wires. You state that these power cables are required for the PF3000 so the situation would be the same for an Insight.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)