Viewing a thread - cutting galvanized with plasma

Forums | Classifieds (1) | Skins | Language

You are logged in as a guest. ( logon | register )

cutting galvanized with plasma	View previous thread :: View next thread
Forums List -> Machinery Talk	Message format

tinman13

Posted 3/25/2008 01:32 (#341258 - in reply to #341245)
Subject: Re: cutting galvanized with plasma(thanks)

A couple of things that have been said already, DRY DRY DRY air. The most important thing! Also a good idea to purge air through the torch for a few seconds before cutting to remove any moisture from the tube in the gun.

Good luck, Steve

cutting galvanized with plasma - Gerald_skca : 3/24/2008 22:38
- Re: cutting galvanized with plasma - bigaljack : 3/24/2008 22:44
- RE: cutting galvanized with plasma - plowboy : 3/24/2008 23:13
  - RE: cutting galvanized with plasma - Ed Boysun : 3/24/2008 23:26
    - RE: cutting galvanized with plasma - plowboy : 3/24/2008 23:33
      - Dryers - Ed Boysun : 3/25/2008 09:35
  - RE: cutting galvanized with plasma - John Burns : 3/24/2008 23:33
    - RE: cutting galvanized with plasma - plowboy : 3/24/2008 23:38
- Re: cutting galvanized with plasma - 22ham : 3/24/2008 23:19
  - Re: cutting galvanized with plasma(thanks) - Gerald_skca : 3/25/2008 00:54
    - Re: cutting galvanized with plasma(thanks) - tinman13 : 3/25/2008 01:32
    - Re: cutting galvanized with plasma(thanks) - glensts : 3/25/2008 10:27
      - Re: cutting galvanized with plasma(thanks) - Gerald_skca : 3/25/2008 14:15
- RE: galvanized = DEATH - iseedit : 3/25/2008 08:39
  - RE: galvanized = DEATH - Angus in ncmo : 3/25/2008 11:05
    - RE: galvanized = DEATH - Skipper : 3/25/2008 14:42
- RE: cutting galvanized with plasma - binderpower856 : 3/25/2008 22:12

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)