Viewing a thread - 9510 grinding stems to a pulp !

Forums | Classifieds (65) | Skins | Language

You are logged in as a guest. ( logon | register )

9510 grinding stems to a pulp !	View previous thread :: View next thread
Forums List -> Machinery Talk	Message format

mij

Posted 10/10/2006 17:45 (#50204 - in reply to #49951)
Subject: RE: 9510 grinding stems to a pulp !

SC, MN.

When you talk about concave clearance in tough stems, I can hear my dad saying if you ran a piece of paper through the cylinder it would remove the print from the paper.

9510 grinding stems to a pulp ! - Paul(WI) : 10/9/2006 20:30
- RE: 9510 grinding stems to a pulp ! - John Burns : 10/9/2006 21:07
  - RE: 9510 grinding stems to a pulp ! - SEK Farmer : 10/9/2006 21:44
    - RE: 9510 grinding stems to a pulp ! - deereman23 : 10/9/2006 22:15
      - RE: I'll try that tomorrow. - Paul(WI) : 10/9/2006 22:39
        
        Re: 9510 grinding stems to a pulp ! - Tony Bone : 10/9/2006 23:02
        
        Re: 9510 grinding stems to a pulp ! - deereman23 : 10/9/2006 23:19
- RE: 9510 grinding stems to a pulp ! - sri : 10/9/2006 23:07
- RE: 9510 grinding stems to a pulp ! - Circle Farmer : 10/9/2006 23:11
  - Re: 9510 grinding stems to a pulp ! - Tony Bone : 10/9/2006 23:23
    - Re: 9510 grinding stems to a pulp ! - wolfwood00 : 10/9/2006 23:40
      - Re: 9510 grinding stems to a pulp ! - Tony Bone : 10/9/2006 23:53
        
        Re: 9510 grinding stems to a pulp ! - sdPete : 10/11/2006 09:38
- RE: 9510 grinding stems to a pulp ! - mij : 10/10/2006 17:45
  - Re: 9510 grinding stems to a pulp ! - Tony Bone : 10/10/2006 22:40

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)