|
| Do yourself a favor and buy a Raven flowmeter and Servo valve. You'll waste a lot of money getting the old Hiniker stuff to work -- you could apply the same $ toward the Raven parts and be ready for the future.
I bought a NH3 bar with a Hiniker controller system. I used the Hiniker for one year...I hated programing it and using it and I couldn't get it to work accurately. I used the Hiniker heat exchangers, and put on a Raven meter and control valve to use with my existing Raven controller. It's so much better than the old Hiniker.
I have two complete Hiniker systems on the shelf that I don't use. One is a 8100 and the other an 8150. I hated them both.
| |
|