Iowa | sakeller - 7/14/2008 17:39
With the rate set at 10 gal/ac and travelling at 10-14 mph, the rate will quickly jump from 5 gal/ac (20psi) up to 25 gal/ac (90 psi). It cycles continuously from low to high in a second or two and speed does not seem to affect it. It will surge continually up and down the field.
Is there anywhere on the GS2 that you can look to see what the rate controller is communicating to the solution pump? For example, on a Raven 4600, one can look at the PWM output to see what the rate controller is communicating to the solution pump. |
4720 rate controller problems
