Viewing a thread - Wilmar Eagle 8500 and EZ-Boom

Forums | Classifieds (1) | Skins | Language

You are logged in as a guest. ( logon | register )

Wilmar Eagle 8500 and EZ-Boom	View previous thread :: View next thread
Forums List -> Precision Talk	Message format

Andycode

Posted 5/18/2008 15:32 (#380417 - in reply to #380197)
Subject: RE: Solution Found : Wilmar Eagle 8500 and EZ-Boom - It's driving me nuts

I have found the problem with the 8500. Eyecandy was correct in that the wiring harness was a made up one and the wires connecting the flow meter were wired incorrectly (signal wired to ground) switching the wires around solved the problem and I am pleased to say that the system is now reporting the correct rates. Turns out that the calibration # of 3619 was correct.

A big thank you to all that responded

Wilmar Eagle 8500 and EZ-Boom - Andycode : 5/16/2008 17:21
- Re: Wilmar Eagle 8500 and EZ-Boom - CornfedHusker : 5/16/2008 21:48
  - Re: Wilmar Eagle 8500 and EZ-Boom - EYECANDY : 5/16/2008 21:55
  - Re: Wilmar Eagle 8500 and EZ-Boom - Andycode : 5/16/2008 23:22
- RE: Wilmar Eagle 8500 and EZ-Boom - EYECANDY : 5/16/2008 21:58
  - RE: Wilmar Eagle 8500 and EZ-Boom - tedbear : 5/17/2008 07:52
    - RE: Further to : Wilmar Eagle 8500 and EZ-Boom - It's driving me nuts - PaulB : 5/17/2008 13:52
      - RE: Further to : Wilmar Eagle 8500 and EZ-Boom - It's driving me nuts - EYECANDY : 5/17/2008 16:33
      - RE: Further to : Wilmar Eagle 8500 and EZ-Boom - It's driving me nuts - tedbear : 5/18/2008 07:22
        
        RE: Solution Found : Wilmar Eagle 8500 and EZ-Boom - It's driving me nuts - Andycode : 5/18/2008 15:32
        
        RE: Solution Found : Wilmar Eagle 8500 and EZ-Boom - It's driving me nuts - tedbear : 5/19/2008 07:40

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)