AgTalk Home
AgTalk Home
Search Forums | Classifieds | Skins | Language
You are logged in as a guest. ( logon | register )

Nanobeam IP address was taken over
View previous thread :: View next thread
   Forums List -> Computer TalkMessage format
 
Supa Dexta
Posted 3/24/2023 12:08 (#10155628 - in reply to #10155615)
Subject: RE: Nanobeam IP address was taken over



NS Canada
I hooked it to the TV via HDMI and a used a plug in mouse, I dug around the settings and viewed some old footage. From there I pulled the internet cable feeding the house nano POE, and plugged it into the NVR to provide it with internet, and then I was able to log into it on my laptop as well, effectively taking the nanos out of the picture and accessing it directly on the house network. So I guess that proves the port is fine on the NVR.

I'll swap that barn POE next. Its powering the barn nano, but not accessing the NVR it seems. I also have a bag of ethernet cables, so god knows which are good or bad. Will have to try different ones until something pops up on that dashboard I guess, showing a cable is plugged in.

I appreciate the time and effort you're providing. This stuff ain't my strong suit.

Edited by Supa Dexta 3/24/2023 12:10
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)