|Ok So I had some time to fk around with this again.. No progress. |
Changed out the POE injector, POE>NVR cable, nano>poe cable, heck I even changed out the nvr to an old one I had lying around... Nothing, it will not recognize something is plugged in downstream.
Took NVR in the house and plugged directly into the internet > comes up right away at xxx.15
So I'm at a loss. Has to be something with that nano I'm guessing? It won't recognize a cable plugged into it and at times is missing the RF environment graph on the dashboard. But connects to the house nano and I can log into it from the house laptop at its assigned IP no problem.