|
| I'll check for the correct valve. I had written it down as to last year's valve setting. But, hey, I've read one thing and ended up doing something 180 degrees opposite and wonder how that happened.
Why does the pressure drop immediately on turning on a boom switch?
I went and took off the 3/8" pressure gauge hose and as soon as I do that I've lost all pressure again. I'm helping a relative get started farming and I had him winterize the sprayer and I didn't go back to check it, so the fault is part mine also, but I happened to find a small crack in a T going to a boom switch. I that happened then my servo valve and flow meter may have gotten frozen also.
Thanks for all help and input. | |
|