|
| I think were getting closer. Had a similar problem with 450 raven on rogator. I Felt stupid because as it turns out all I had to do was flip the controller to manual instead of on Rate 1 or 2 and then move the pressure up to 70 or 80 lbs. I think the rates were just to low on rates 1 or 2 to start and it would lose prime right away. Maybe upping GPA on rate would work too but I would just switch to manual
Just though I'd suggest something simple before you rip and tear.
Good Luck
Daylate | |
|
Sprayer problems
