|
| I had to reprogram the Raven 450 from NH3 to sprayer and I reprogramed it twice just in case that I entered something in error.
I had it on manual and originally set for 7 g/A. Since it wasn't working, I increased it to 17 g/A with 0 pressure when turning on the boom.
At the end of where the boom switches is the line leading to the pressure gauge. I am going to take that hose off to check if water will shoot out of there and then increase the size of the opening to see what happens when back pressure is reduced--same as turning on booms.
Thanks for everyone's idea of what to try.
Had .3" over night with 1/2-3/4" for today and 2-3" forecast for tonight. I'll go and trouble shoot before going to church.
Thanks again! | |
|