Ted, I'm using the Cam Hi Pro app with Lenova 7" Android based tablet. You should be able to edit the camera name. I can open the camera app on the tablet, at this time the camera is not powered up and is physically out of range. Guess it retains the last image from when it was on ? I scratched out my camera Id in white not sure if that was a unique ID or just generic camera name. Open the camera in Cam Hi Pro and click the gear icon. It shows a pen by the camera name that allows me to edit it . Clicking on the pen icon should bring up the keyboard to change the name. I have mine named Larsen Combine Camera. Here is how it looked unloading beans into the truck https://photos.imageevent.com/vprb/6620unloadingaugeripcam/Unloading%20Beans.mp4 If that link does not work it is the last image in this album. https://imageevent.com/vprb/6620unloadingaugeripcam For the OP Larsen Wifi Camera. Wanted to be able to see far side of truck when filling across side ditch. Tied into light on unloading auger to eliminate running a long power cord around auger swivel and clear to other side of machine to firewall. Maybe not the best as it takes a little bit to power up but I don't need this for every dump. Install and bracket https://talk.newagtalk.com/forums/thread-view.asp?tid=950471 Tablet for viewing discussion https://talk.newagtalk.com/forums/thread-view.asp?tid=951820 Tablet set up and a couple pictures from camera illustrating what I needed to see. https://talk.newagtalk.com/forums/thread-view.asp?tid=954973 |