AgTalk Home
AgTalk Home
Search Forums | Classifieds (133) | Skins | Language
You are logged in as a guest. ( logon | register )

Installing Raven SCS440 for NH3
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
tedbear
Posted 8/21/2008 16:37 (#440060 - in reply to #439989)
Subject: Re: Installing Raven SCS440 for NH3


Near Intersection of I-35 & I-90 Southern Mn.
12' Product extension cable with trailer plug and separate flowmeter connector: 115-0159 409
24' Product extension cable with trailer plug and separate flowmeter connector: 115-0159-414

12' Product extension cable with 16 Pin Amp connectors: 115-0159-856
24' Product extension cable with 16 Pin Amp connectors: 115-0159-857

From your description you would need the '409 or the '414 depending on how much length you need. The part that puzzles me is that you state that the cultivator side has a 3 pin weatherpak connector. The connectors Raven uses for the flowmeter are the male and female connexall brand of connectors. A 3 pin weather pak would not mate with the extensions nor the original cable. Are you sure the cultivator side has a weatherpak?

Edited by tedbear 8/21/2008 16:38
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)