|
Kansas | Hope I can get this relayed across with my jibberish.
The plug on the tractor has 3 places for spade connectors. If you look on the backside you will see a very large wire.....Possibly 8 gauge or so?? coming out of one port. Another will have a single smaller wire coming out and then the last one will have 2 smaller wires coming out.
Looking on the late style resistor there will be a number 1 a number 2 and then the spade with no number that is saudered to the "doohickey" on the outside of the resistor that goes across and connects to the wiring inside.
#2 on New resistor......Hooks to the big heavy wire on the plug. One I think is possibly an 8 gauge wire.
#1 on New resistor.....Hooks to the single smaller wire.
Spade on New resistor with no number connects to the terminal on the plug of the tractor with the two smaller wires running out of it.
Low, and Medium both work setup that way.
HTH's
Rich
| |
|
It worked. Installing late style Fan Resistor in early model magnum
