|
Boone, Iowa | I am looking for a tractor to replace a 7120 mfd. We use this tractor to pull a 7200 16 row planter, post spray a 1200 gallon 80 ft. boom sprayer, pull a 525 grain cart, a 32 ft. Krause rock flex disc, and a 13 knife NH3 bar. I will need 18.4x42 tires at the back and 14.9 on the front. Am I asking for too much from one tractor? Once the 9170 gets unhooked from the chisel plow, it can go to the disc if needed, but normally goes right to the 19 knove NH3 bar. Will fuel consumption be too high for the spring work? Should I be looking at a 7240/8940 instead? Thanks. | |
|
7250/8950 too big?
