|
It made a Crop | Also, check for mice chewing damage to wires. Had the same problem with 1660 last year. Mice had nested under step/panel on left side of cab. Just so happened the unload wire was the first to short out. I tape and/or replaced several bare wires.
Give that a look see. As for the auger being stuck. Just pull the pin on the cylinder and manually push the auger out. That will answer that question.
Mine quit working when the auger was out. So, I was to finish the day. End of the Day just swung the auger back manully. | |
|
1680 unloader won't swing out
