|
West Michigan | For the reverser. You need to stop both head and seperator then hold head button in reverse. While holding the head in reverse with left hand rock back and forth the seperator button with right hand. Takes a little to get used to compared to the foot reverser. Not sure about the head drop. Moisture sensor can be adjusted in your yield monitor screen. Not sure if your running GS1 or GS2. As for it stalling out when you get full grain tank you should check the seal around the plunger we have had problems with grain going past the seal and causing it to not be able to slide all the way in. | |
|
9760 problems
