Posted 10/2/2008 22:21 (#474013 - in reply to #473963) Subject: RE: JD 9510 dual range cylinder trouble
Had a very rough vibration in a 9600 a few years ago. Looked at the 2 speed clutch also. Ended up being the right side spiders in the cyl. chamber were cracked.
It's not the easiest welding area to do but just check it out a few days ago and has done many acres since , Once seen a combine where the operator didn't stop when the spider broke and the cyl. did alot of tin and steel damage.
Gettn BY