AgTalk Home
AgTalk Home
Search Forums | Classifieds (2) | Skins | Language
You are logged in as a guest. ( logon | register )

Starfire RTK Base won't work with GenII reciever.
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
Mike Smith
Posted 7/17/2008 17:50 (#417268 - in reply to #416775)
Subject: Re: Starfire RTK Base won't work with GenII reciever.


NW NSW Australia
We had a situation where our GenII acting as a base would not give extend mode and then the RTK signal failed completely. It turned out that the antenae for SF2 correction had failed and so activations could not be verified etc. We were lucky enough to have a tech guy swap the top on ours for another one from a GenII that the gps had failed.
This may not be your problem but it's a possibility. Check to see if you can get SF2 with it.
My cousin uses our base with an ITC at around 10 miles away.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)