Centre county Pennsylvania, USA | To configure EZGuide 250 NMEA output for interface to your YM 2000 system:
From EZGuide 250, select Configuration / System / GPS / NMEA Output.
Then,
(1) select Port Parameters and enter port parameters for your YM 2000 system (probably 4800 baud, 8 bit, no parity)
(2) select Message Selection and turn ON only the NMEA messages required by your YM 2000 system (probably GGA and VTG) , make certain all other messages are turned OFF. |
YM2000 with ez 250 questions
