|
Central Minnesota | The low limit needs to be different for every different tip sizes and different boom widths. Wider booms with large tips will have a higher flow rate then small tips on a shorter boom. The easiest way to tell what to set it at is press on your volume per minute button when you are spraying and then slow down till your pressure is as low as you want it to go. If it says you are applying 10 gallons per minute at that pressure then I usually set my low limit maybe 1 gallon per minute more. If you then change to bigger tips check flow rate and adjust accordingly. Once you have the low limit set right you really don't need the delay setting for spraying. Also if you get in a situation you want to spray heavier for a ways I just have a higher rate in rate 2 and switch to that one for a ways. (And then hope I don't forget to switch it back before the spray runs out before the field is done.)
| |
|