|
roaming | Yes, you can put a yield and moisture kit (sensors, harnesses, YMIU, and Pro600 display) on a 2388 that is not factory-equipped with the system. Your dealer can order everything needed.
If you get ONLY the yield and moisture kit for the 2388, you will not be able to run guidance. Guidance requires a separate "platform kit" that includes the valve, plumbing, override sensor, steering sensor, etc. Then you also need a GPS receiver and NavII controller.
You cannot run a NavI system with the Pro600, through the VT software or any other method. You must use the VT display that came with your NavI system. If the VT fails, you'll need to replace it. If and when replacements are no longer available, you'll be looking at replacing the guidance system, unfortunately. | |
|
VT CaseIH monitor plastic breaking
