Northern Illinois | http://www.jottodesk.com/Comersus/store/comersus_listCategoriesAndP... is where I got my ideas.
I've fabricated all of my own. I have one baseplate for the laptop that has a sleeve that slips over a piece of tubing that sticks up from the floor. In the trucks, I just weld a plate to the bottom, and bolt through the floor, but in the Camaros, I fasten a bracket to the existing seat mounting bolts.
This reminds me. I should take some pictures of these.
Ed Winkle - 1/12/2007 17:22
Gary has about a good setup that is non factory installed I have ever seen.
Won't forget his setup driving him right to my place in podunk heaven...
Ed
Are you referring to me Ed? I apoligize for not recognizing you if you are. My setup has led me to many places, and I sure don't recollect them all. |