AgTalk Home
AgTalk Home
Search Forums | Classifieds (10) | Skins | Language
You are logged in as a guest. ( logon | register )

Putting tile in a field
View previous thread :: View next thread
   Forums List -> Crop TalkMessage format
 
GrainTrader
Posted 4/3/2024 17:48 (#10692546 - in reply to #10692295)
Subject: RE: Putting tile in a field



20 Miles West of Indianapolis Indiana
boog - 4/3/2024 14:27

grower3 - 4/3/2024 12:46

3" might be doable with plenty of slope but I don't think I would risk it laying pretty flat for two reasons. Capacity and not much margin for error installing it.


We have our tile installed by a professional contractor. We're pretty flat & because of the slim margine of error he refuses to install 3". When we started having grid tile put in we went with 4" on 50'. At the time most were putting 4" on 60s at the time. I had a 70 ac field done half on 4 x50s & other have 4 x 40s. In a couple low spots we split the 50 in half but didn't split the 40s. That was over 10 years ago yield maps show an advantage of the 40s over the 50s but very little difference for the 25s over the 40. Since then we have been running the 4" on 40s.

A couple of neighbors were big into 3" on 30s but have since gone to 4" on 40 .
.

Thats very interesting to hear the 40 vs 50 comparison. I tiled a farm I own on 40’s and have wondered if I should have just done 60’s. I have done 80 and 60 on some rental farms that were on my tab. There’s no great way to go about rental farms without long term leases and pay back provisions: I’ve considered 120’s with the intention to split into 60’s later but the reality is you’ll hit a lot of old tiles on 120’s that will cause bigger problems then you may solve.
80’s with the plan to split later might be the best idea really…
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)