Near Intersection of I-35 & I-90 Southern Mn. | For the strip-till module, one Single Pole Double Throw switch is sufficient. It would involve the switch, 3 wires and a green Deutsch connector. One wire would be 12V in from the green connector Pin 1 to the bottom terminal of the SPDT switch. Another wire would be switch detect in from the green connector Pin 7 to the top terminal of the switch. The third wire would be from the middle terminal of the switch and lead back to the green terminal Pin 2 for the Master which is F1.
With a single boom such as the Strip-till, no section switch inputs are needed. Don't forget about the implement switch branch. You must either have it jumped or use an actual implement switch to create the connection when the rig is lowered.
Edited by tedbear 2/15/2024 13:34
|
Ag leader display cable options.
