|
SE Nebraska | Thank you for the excellent explanation. In the pin out that I found for the auxiliary plug online pin number 8 is auxiliary valve one, so I will use that to trigger the master valve.
I jumped to the conclusion it used boom 6 because that is what the fast valve was was connected to(apparently only using the power and ground) and that line had a blue with white stripe wire zip tied back to the boom 6 wires. So I concluded (incorrectly )that must be the trigger wire.
Can you explain the wiring for the fast valve? On my system it appears to use the power and ground from boom 6 and the servo open and closed pins from channel 1. How does the monitor and fast valve handle the transition from servo valve to full close.
Thank you again very much for your help. | |
|
Raven fast valve to two valve conversion.
