Near Intersection of I-35 & I-90 Southern Mn. | Putting this another way.
Looking at your last picture. Notice the 3 wires (Black, Brown and Blue) in the upper left connector. Leave those alone. You have circled an unused location below them which would be Boom 6. Do not add any wires to this connector.
Notice the connector to the upper right. In the picture it has 3 wires installed that deal with an implement switch. This will need to be jumped or connected to a real implement switch.
One of the other unused locations in that connector is what you should use to trigger the Master ON/OFF valve. The new Master ON/OFF valve will need power and ground of its own like the 3 section valves so you will need to supply Power and ground. The heavy red and black wires leading to the Liquid Module are constant 12V and ground and can be branched off for the ON/OFF valve power and ground.
Then all that remains is to inform the system that Auxiliary Valve 1 should behave as a Master ON/OFF valve. I believe it defaults to that setting anyway.
Create the configuration with 3 booms each of their actual widths. |
Raven fast valve to two valve conversion.
