NW MN | If you have a SteadySteer or SteerCommand Z2 the remote engage plugs into the gray connector on the silver SCM box. If you have a legacy foot switch you’ll need an adapter. On an older system, look for a short cable with a small male 4-pin DTM series Deutsch connector on the back of the black steering controller box. Actual remote engage circuit is on pins 1 and 4. Looks like this.
(F7E6C1E6-086C-4DB3-AD1A-C5256C912670 (full).jpeg)
Attachments ---------------- F7E6C1E6-086C-4DB3-AD1A-C5256C912670 (full).jpeg (88KB - 45 downloads)
|