| What did the 1/2” line connect to?
I’m in central Texas so take what I say with a grain of salt but it would be my assumption that piece is an acid neutralizer of some sort that treats the acidic condensation and then allows the water to exit via the 1/2” connection into a sanitary drain or outside.
Just a wild guess but that’s my story and I’m sticking to it!
Caleb
Edit: For once my guess was right. Look up ICP part number 612833
Sprunk - 10/8/2023 22:17
I am now wondering if it isn't a "homemade" trap. Looks like a 90° threaded fitting was glued into the 2in PVC. The 1/2 NPT thread of the 90° is what is broken. There was also a styrofoam cork with a lead strip down the center sitting on top of the 90° almost above the waterline, I don't know it's purpose. I might try to knock the 90° out and glue another in its place. If it is a custom made part, it sure is nicely made.
Edited by AgAcGuy 10/11/2023 15:54
|