|
Ontario | Ok well here’s a bit of an update.
Current plan is to pull the gearbox, cut a piece of 5/16 or 3/8 plate to go under it to reinforce and level out the gearbox, then new blades and get the clutch adjusted.
Had a puller on the hub, red hot with the torch and had the air hammer on it but wouldnt budge. Will try again tomorrow if I have time.
Edited by Raineyfarm40 7/3/2022 21:17
 (5E69F082-9C9A-4221-A253-28EF72FD5D1D (full).jpeg)
Attachments
----------------
 5E69F082-9C9A-4221-A253-28EF72FD5D1D (full).jpeg (164KB - 29 downloads)
| |
|
Bush hog ripping gear box off
