|
East central Ohio | I have an Agleader STMM on a Kinze 6 row that ran perfectly last year. This year I go to the field and it telling me no seed flow. After following the troubleshooting steps I have determined that I am not getting 8 volts to the sensors. Unplugging the auxiliary plug and I don't have 8 volts at the proper pins there either. I do have power at the high power connector and a flashing green light. I will say it has a new implement cable #4000726-12 since I robbed the other one for the wheat drill last fall. It is also a different Integra display than last year. Any ideas?
BTW I through in the original SM3000 monitor and all the sensors work fine. | |
|