|
Sheldon, ND | When we had our 8410T the dealer was into the back end at least 2 to 3 times working on something of that sorts. We had the same problems. We also found out on our planter when we switched it over to the 8520T we thought the battery was going dead, but it was the load sense line for the power beyond did not have to be connected. Our drives were connected to the power beyond and when you tried to start the engine it was ramping up the hydraulic pump wide open so the starter had to turn that and the motor. Just some other info for ya. | |
|
Hyds shut off on 8310T when get out of seat.
