Dallas Center IA 515-720-2463 | The biggest 271 was 23.5'. At the same time as the model 271 there was a 272 in 27', 30' or 33' - plus some inches on all three.
Pretty much the same design, model 272 were built out of bigger rect tubing.
Later models 273 and 274. Pretty much the same as the 271 and 272 except 1 -1/2" round gang bolts, different heavier bearings.
Later models had a narrow spacing option, 7-1/2" I think.
There was a 25' model 273.
The White 271, 272, 273 and 274 are a better stalk cutting disk than a IHC 490, but will not do as nice and pretty job as a finish disk.
33' would be a load for a 4-210. |