|
Manitoba | I use a tandem truck for seed for seeding. This truck has fairly high sides and I'm getting to old to jump in the back every time we're down to the last few bushels. I'm thinking of making some angled corners possibly out of plywood that would be used only for seeding. Any tips on how to do this? Iwas thinking of doubling up 3/4" plywood with some kind of support behind it going to the corner of the box. The sides of my box have a bit of a curvy profile so cutting the wood to fit nicely will be a chalenge. Duct tape may be resorted to. Thanks. | |
|
Making Angled Corners Inside Back of Grain Dump Box
