|
Center of IL | Your missing the stroke setting flange,pump setting scale, stroke setting arm and the square head bolt at least. Had my pump worked on in Champaign, IL one time and was in the field spraying and most of this stuff fell off thanks to somebody not tightening the set screws enough. Should have known when the guy who worked on it had a mohawk with orange streaks, Illini fan, I guess. Anyway, I had a machine shop thread a hole in shaft end so I could put a large washer on end to keep it in place in case it ever worked loose again. Luckily I found most of the parts that day. Good Luck. By the way, I'm fairly sure a 4900 is the same as an L3000 . Also, I believe when that happened it would not move the pistons or pump. The keyway and key have to be all hooked up as I remember.
Edited by Beef Cen IL 3/23/2009 15:22
| |
|