|
Jewell County KS | I'd bet the trans. brake just needs adj.
Pull up the floormat and take out the cab floor under your feet. I'd even pull out the seat for more room.
Clutch insp. plate is right there on top of housing. brake gap is to be 1/2 inch(I use a piece of 1/2 inch keystock) . Tie some long twine on any tools you use in there just in case you slip.
It should shift a little better with the powershift in low. I don't shift the hi/low or the main trans while moving. Just pick your gear and let out the clutch It will move it.
I have the clutch and trans brake adj procedure I can scan for you if you need it.
I'm sure I'm missing something.... If OnionFarmer sees this he'll get you set straight | |
|
Massey 4800 shifting problem
