|
Ethridge, TN | You might have 2 things going on here.
Looking at your pic, the edge of that flighting looks to be pretty round, so it may be you have enough "wear" to be causing the problem. Pulling the auger out and using a grinder to put a "square" edge back on the flight may fix it.
Second, I wonder if the auger is installed to where it is positioned to far to the opposite side from the elevator?? I was thinking that the end of the flight came thru that flange?? Maybe it was replaced one time with a "should fit" that "didn't".
| |
|
Need some advice
