|
| Yes, I am getting power to the GPS with a cable spliced into the Greenstar plug that goes to the mobile processor. I know it has power because I did exactly what you said you do, hooked up a pf3000 to change the NMEA strings that greenstar needs. It would not let me change the configurtion until the GPS was recognized by the PF3000. I also used Ag remote (trimble box simulator) to look through ports a and b. Does anyone know what all the port A in and out settings should be and also Port B in and out for the greenstar to work. I want to make sure I have it all programmed right. Tedbear thanks for the info on port A and port B. I didn't know which was which. | |
|
GPS 3100 (Agleader) to GS1 w/ Brown mobile processor not getting a signal
