|
| Do you have a deere harness all the way to the valves, or do you have an adaptor between the Deere harness and your old raven harness? Are you using the constant power supply harness that runs in through the window and connects to the Master ON/Off switch in the cab as well as the accessory outlet? Need a little more info to isolate the problem.
Deere tractor G* ready?
Check the two biggest pins in your ISO coupler at the back of the tractor to make sure you are getting power to there.
Edited by Matt NCOK 9/21/2008 10:36
| |
|
GS2 controlling NH3 application problem
