|
Southwestern, MS | First off, let me say thanks for the replies. I really appreciated the help. I cut a sample of rice today, so I have been away from my computer. My GPS receiver is a Gen II, not an iTC. I tried an iTC, but the system does not recognize it at all. My Gen II GPS is the same receiver that I have had on it each year, except this year I installed a TCM on it for autotrac on my tractors. GPS worked fine with everything else, just not 9610. Today, I took the bottom of GPS, and unhooked the TCM. When I did this, I no longer got the error message, but now yield mapping system does not "see" the GPS at all. I can go to Info, and there is no GPS. I might need to replace the wiring harness that connects the TCM to the GPS with the original harness that had no attachment for the TCM. This may make it work.
Thanks for any help
Noble G.
Edited by MeGuedon 8/17/2008 21:44
| |
|
9610 Yield Monitor Question
