|
Southwestern, MS | I have a yield monitor on an 1998 model 9610 that has a side mounted moisture meter and silver wedge box in cab. Yield mapping software works correctly when the JD SF1 GPS reciever is not attached to system. The display in the cab works correctly, I can calibrate moisture sensor and grain flow, I can setup header, etc. When I attach the JD SF1 Reciever to the system, I get an error in the cab on the display telling me that system does not detect the yield mapping components, the moisture sensor or grain flow sensor. Unplug the GPS and everything comes back. I am getting "fire" to all the pins coming from the cab, going to the GPS. I have updated the system on combine. Has anyone had this problem before?
Thanks for any help
Noble | |
|
9610 Yield Monitor Question
