Central To Everything and Close to Nothing | Couple of things for documentation with a GS2. If it is a 1900 cart that is 4/5 volt CAN, you will need a CAN Bridge which will convert the 4/5 volt CAN to 2.5 volt CAN. This is a cheaper route than replacing the wedgbox. Talk to your local dealer. The cart software will need to be version 11 which has been out for a few years now.
As for the 1910 only recording when the front tank is engaged, check in your seeding tool setup on the SeedStar that you have your primaries for the Middle and Back tank set to Feeding. If they are set to Not Feeding, you will not get any recording if you only have those tanks on. It gets a little tricky if you are double shooting with blockage sensors on which top and bottom primaries to have set for feeding but it can be done. Once you have everything set right, it won't matter which tank you have on, you will get it to record provided you have your documentation setup properly. |
Field Doc w/ GS2 and older 1900 Cart won't work
