|
Tekonsha, Michigan | Hi,
I had ran my 856 on a 10" swing hopper auger last fall the swing had a hydraulic motor and the auger was PTO. After long periods of running it the tractor would start to push hydraulic oil out under the floor some where. I assume it was getting hot, we kept the oil right up full and oil never looked or smelled burnt. The problem I'm having with it now is the PTO won't engage, you have to wind the tractor up to get it to start turning, when it starts turning it runs the auger just fine. Any ideas on a cause? I have checked the linkage everything seems OK, hydraulics still work good. Any thoughts?
Thanks, Bruce
| |
|