|
Gridley IL | Did you add the greenstar harness, is it the universal harness, or was the tractor greenstar ready? I hooked up my PF Advantage to my Greenstar harness using the RS232 port on the harness with a plain old straight through male/female 9-pin serial cable and the null modem that came with the PF Advantage. I am using the brown box with SF1 and ATU. Not familiar with what ports are on the AFS Pro but if there is a 9 pin serial port for the input of GPS that option would work I would think. I had to add the greenstar harness in a 7810 and 8200 for steering and GPS source for logging as planted maps, and yield mapping. You will still need to set up the serial port on the greenstar harness up in the _Setup, _Starfire ITC, _Serial port, and then it will give you the settings that GPSNUT talked about. I thing it explains it all pretty thoroughly in the Starfire ITC operators manual. The trick might be finding the RS232 port if it is a greenstar ready tractor. Hope this helps. | |
|
Greenstar GPS w/ AFS pro 600 display on 1200 planter?
